Ridgeback® Cable and Hose Protector Ramp

The NEW Ridgeback® Cable Protector is designed with three generous channels underside of the hinged protective lid to accommodate cables and hoses beneath the ramp. This versatile road safety product can be used for pedestrian traffic at public events as well as a ramp to reduce vehicle speed down to 5mph to improve safety conditions in residential and commercial areas. The latest high performance polymer technology has been traffic tested with axle loads of up to 6 tons and conforms to the durability requirements of BS EN 1824:2011.

CABLE/HOSE CHANNELS
Three 4.5cm wide x 5cm deep cable/hose channels on the underside of the hinge protective lid to accommodate cables safely beneath the ramp.

CABLE/HOSE PROTECTION
Strong polypropylene hinged lid provides easy access allowing cables/hoses to be inserted when ramps are assembled.
Bright yellow lid designed to improve visibility and to reduce slipping and tripping for pedestrians.

EFFECTIVE SPEED REDUCER
Designed to reduce vehicle speed down to 5mph, improving safety conditions in residential and commercial areas.
Traffic tested with axle loads up to 6 tons.

INTERLOCKING DESIGN
Effective interlocking system for easy connectivity to form a continuous ramped protector.

EASY ORDERING & ASSEMBLY
Single ramp variant to ensure simple ordering.
Designed with bolt holes to provide easy installation and extra stability.

MULITIPLE APPLICATIONS
Suitable for pedestrian traffic at public events including musical, sporting, exhibitions and fairgrounds.
Ideal for working environments such as building sites, warehouses, electrical sub-stations, quarries, mining and rail.

Dimensions - H 7.5cm, L 100cm, W 60cm, 29kg

 

An exceptionally tough speed ramp made from 100% recycled material, that is available in two heights, 50mm and 75mm 500mm x 400mm for 10mph and 5mph zones respectively.

Interlocking
Each Section has an integral interlocking facility for ease of siting and installation.

Reflectors
Each inner section has incorporated white reflectors for extra visibility.

Hose/Cables Channel
40mm x 25mm channel on the underside allowing for hose/cables to be located in.

Pre-Drilled Bolt Holes
All sections are pre-drilled ready for inserting relevant bolt for specific road surface, i.e. concrete or asphalt.

Branding Area
120mm x 60mm area allowing for a clients name to be embossed.

Dimensions -

• Height - 5cm
• Length - 50cm
• Width - 40cm
• Weight - 8.2kg

REFLECTIVE SPEED RAMP WITH 600mm CROSS SECTION

The NEW Ridgeback® 600 joins the existing range of speed reducing products. The NEW modular units provide a global solution by reducing traffic speed and increasing safety. These inner and end units have integrated reflective areas featuring the latest high performance technology conforming to EN 1436:2018 and durability requirements of EN 1824:2011.

INTERLOCKING

Interlocking system for easy and effective installation. Helps to maintain stability in assembly and use.

REFLECTIVE

Increased area of reflectivity compared to traditional styles of speed ramp. Innovative thermoplastic retro-reflective elements with incorporated glass beads make the ramp robust and resistant to damage.

EASY TO ORDER & ASSEMBLE

Ridgeback® is designed for easy ordering, with two simple ramp sections that can be used in many configurations. Easy to assemble with optional additional anchor points for improved stability.

DISTINCTIVE DESIGN

Developed to reduce vehicle speed, improving safety conditions in residential and commercial areas. Design optimises visibility for road users, maximising speed-reduction performance.

RAMP OPTIONS

3cm - Aimed to reduce speed to a maximum of 30kph/20mph.
5cm - Aimed to reduce speed to a maximum of 15kph/10mph.

The Ridgeback® has been developed to incorporate both colours into one speed bump and each end cap. The simple design also allows each end cap to be used for either end of your speed ramp for convenience.

REFLECTIVE SPEED RAMP WITH 600mm CROSS SECTION

The NEW Ridgeback® 600 joins the existing range of speed reducing products. The NEW modular units provide a global solution by reducing traffic speed and increasing safety. These inner and end units have integrated reflective areas featuring the latest high performance technology conforming to EN 1436:2018 and durability requirements of EN 1824:2011.

INTERLOCKING

Interlocking system for easy and effective installation. Helps to maintain stability in assembly and use.

REFLECTIVE

Increased area of reflectivity compared to traditional styles of speed ramp. Innovative thermoplastic retro-reflective elements with incorporated glass beads make the ramp robust and resistant to damage.

HOSE/CABLES CHANNEL

5cm ramp features a 6cm x 3cm channel on the underside of inner sections to accommodate cables safely. Channel continues through end caps to complete the overall finish and maintain cable stability.

EASY TO ORDER & ASSEMBLE

Ridgeback® is designed for easy ordering, with two simple ramp sections that can be used in many configurations. Easy to assemble with optional additional anchor points for improved stability.

DISTINCTIVE DESIGN

Developed to reduce vehicle speed, improving safety conditions in residential and commercial areas. Design optimises visibility for road users, maximising speed-reduction performance.

RAMP OPTIONS

3cm - Aimed to reduce speed to a maximum of 30kph/20mph.
5cm - Aimed to reduce speed to a maximum of 15kph/10mph.

The Ridgeback® has been developed to incorporate both colours into one speed bump and each end cap. The simple design also allows each end cap to be used for either end of your speed ramp for convenience.

REFLECTIVE SPEED RAMP WITH 600mm CROSS SECTION

The NEW Ridgeback® 600 joins the existing range of speed reducing products. The NEW modular units provide a global solution by reducing traffic speed and increasing safety. These inner and end units have integrated reflective areas featuring the latest high performance technology conforming to EN 1436:2018 and durability requirements of EN 1824:2011.

INTERLOCKING

Interlocking system for easy and effective installation. Helps to maintain stability in assembly and use.

REFLECTIVE

Increased area of reflectivity compared to traditional styles of speed ramp. Innovative thermoplastic retro-reflective elements with incorporated glass beads make the ramp robust and resistant to damage.

EASY TO ORDER & ASSEMBLE

Ridgeback® is designed for easy ordering, with two simple ramp sections that can be used in many configurations. Easy to assemble with optional additional anchor points for improved stability.

DISTINCTIVE DESIGN

Developed to reduce vehicle speed, improving safety conditions in residential and commercial areas. Design optimises visibility for road users, maximising speed-reduction performance.

RAMP OPTIONS

3cm - Aimed to reduce speed to a maximum of 30kph/20mph.
5cm - Aimed to reduce speed to a maximum of 15kph/10mph.

The Ridgeback® has been developed to incorporate both colours into one speed bump and each end cap. The simple design also allows each end cap to be used for either end of your speed ramp for convenience.

The NEW Ridgeback® Speed Ramp is designed to reduce vehicle speed and improve safety conditions in residential and commercial areas.

The products distinctive design and the angle of retro-reflective elements optimises interaction with vehicle headlamps to improve visibility.

The latest high performance polymer technology conforms to requirements of BS EN 1436:2018 and durability requirements of BS EN1824:2011.

Features and Benefits

DISTINCTIVE DESIGN
Design optimises visibility for road users maximising performance.

INTERLOCKING
Effective interlocking system for easy connectivity and maintains stability before and after assembly.

REFLECTIVE
Innovative approach of using thermoplastic retro-reflective elements with glass beads for improved visibility.

HOSE & CABLES CHANNEL
Channel on the underside of end caps to accommodate cables safely through the speed ramp.

Dimensions -

• Height - 7.5cm
• Length - 20cm
• Width - 40cm
• Weight - 9kg

The NEW Ridgeback® Speed Ramp is designed to reduce vehicle speed and improve safety conditions in residential and commercial areas.

The products distinctive design and the angle of retro-reflective elements optimises interaction with vehicle headlamps to improve visibility.

The latest high performance polymer technology conforms to requirements of BS EN 1436:2018 and durability requirements of BS EN1824:2011.

Features and Benefits

DISTINCTIVE DESIGN
Design optimises visibility for road users maximising performance.

INTERLOCKING
Effective interlocking system for easy connectivity and maintains stability before and after assembly.

REFLECTIVE
Innovative approach of using thermoplastic retro-reflective elements with glass beads for improved visibility.

HOSE & CABLES CHANNEL
Channel on the underside of end caps to accommodate cables safely through the speed ramp.

Dimensions -

• Height - 7.5cm
• Length - 50cm
• Width - 40cm
• Weight - 16kg