PRODUCT DESCRIPTION

Lightweight monofilament polypropylene barricade rope. Floats in water and has excellent resistance to oil marine growth and most common chemicals. Designed not to rot this rope has good abrasion and UV resistance allowing for the color to last the life of the rope. 

FEATURES

PRODUCT DESCRIPTION

Non-adhesive barricade tape for use in cordoning off areas in industry, construction, events, and temporally restricted areas or operations. Strong durable quality with excellent tear strength.

FEATURES

• Bold, black lettering on a bright, long-lasting yellow background will be hard to miss.
• Yellow background for CAUTION/CAUTION tape
• Made of tough, durable (2.5 mils) polyethylene
• Highly resistant to acids, alkalis, and other soil components
• Tape is 3-Inch (76 mm) wide in a 200-foot (61 m) roll

PRODUCT DESCRIPTION

Non adhesive barricade tape for use in cordoning off areas in industry, construction, events and temporally restricted areas or operations. Strong durable quality with excellent tear strength.

FEATURES

• Bold, black lettering on bright, long-lasting Red background will be hard to miss
• Red background for DANGER tape
• Made of tough, durable (2.5 mil) polyethylene
• Highly resistant to acids, alkalis and other soil components
• Tape is 3-Inch (76 mm) wide in a 200-foot (61 m) roll

PRODUCT DESCRIPTION

The I-Beam Trolley Anchor (Part # A6101) is an anchor designed to be used in combination with either a lanyard or an SRL to form a complete I-Beam trolley system. It may also be used for fall restraint and as a work positioning device. The I-Beam trolley wheels allow for smooth travel around the work area while always remaining connected. The safety locking toggles allow for easy adjustment and also eliminate the risk of accidental clamp slippage. For use by one worker with a combined weight of up to 310 pounds. This is the most versatile I-Beam trolley system on the market.

FEATURES

• Meets ANSI Z359.18-2017,  ANSI A10.32-12, and CA-EN 795
• Compliant with OSHA 1926.502 and OSHA 1910.66
• Product Weight: 7.7 lbs.
• Beam Flange Width: 3″ – 10″
• Breaking Strength: 5,000 lbs / 22kn
• Free Moving Rollers
• Web/D-Ring connection point
• Easy pin adjustment

PRODUCT DESCRIPTION

The Beam Walker Super Slider 12" - 30" (Part #A6104) is a large version (30” capacity) fall arrest anchor designed for use on the top flange of steel I or H beam. Light, smooth, and easy to use, the Beam Walker Super Slider 12" - 30" is designed for fall protection, rope access, and work positioning. This I-Beam trolley is the best on the market for worker safety!

FEATURES

• Meets ANSI Z359.18-2017, ANSI A10.32-12, and CA-EN 795

• Compliant with OSHA 1926.502 and OSHA 1910.66

• Beam Flange Width Range: 12″ to 30″

• Beam Flange Thickness: .25" to 2.5"

• Breaking Strength: 5,000 lbs / 22kn

• Product Weight: 7.2-lbs / 3.35 kg

PRODUCT DESCRIPTION

The Beam Walker Super Slider 3" - 14" (Part#A6103) is a fall arrest anchor designed for use on the top flange of steel I or H beam. Light, smooth, and easy to use, the Beam Walker Super Slider 3" - 14" is designed for fall protection, rope access, and work positioning. This I-Beam trolley is the best on the market for worker safety!

FEATURES

• Meets ANSI Z359.18-2017, ANSI A10.32-12, and CE-EN 795
• Compliant with OSHA 1926.502 and OSHA 1910.66
• Beam Flange Width Range: 3.5″ to 14″
• Beam Flange Thickness: .25″ to 1.25″
• Breaking Strength: 5,000 lbs / 22kn
• Product Weight: 3.3 lbs.

The Belt Loop Anchor is a compact and reliable solution for securing tools and accessories while working at height. Designed for safety and convenience, it easily attaches to belts or webbing, ensuring tools remain within reach and reducing the risk of drops. Its durable construction provides long-lasting use, making it ideal for industrial, construction, and utility tasks where safety and efficiency are top priorities.

Dimensions:
130mm x 25mm
Opening 65mm fit over 50mm webbing or belt
Max Load: 3KG
Orange and green color in stock

FEATURES

• Custom engineered for billboard use
• Material: powder-coated steel
• 5,000 lb pre-installed anchor
• Discreet design for permanent installation
• A curved neck allows for anchorage on the front of the billboard without covering the advertisement

PRODUCT DESCRIPTION

The Malta Dynamics line of Hard Hat Mounted Face Protection is designed specifically as an accessory to the Malta Dynamics’ Hard Hat line. When job site applications demand both head and face protection our wide variety of products are compliant, safe, durable, and affordable. The Malta Dynamics flat acetate visor is to be used in conjunction with the Malta Dynamics brand face shield brackets to protect against light chemical splashes and impacts. Brackets are available in several mounting styles that attach securely to Malta Dynamics’ hard hats and caps. Malta Dynamics’ visors conform to ANSI/ISEA Z87.1-2010 standard for face protection when used in combination with Malta Dynamics’ headgear or face shield brackets. Products are available for both high heat, high impact, and basic impact applications. Always wear ANSI Z87.1-2003 approved goggles or safety glasses with face shield frames and visors for maximum protection.

FEATURES

• The face shield bracket complies with ANSI Z87.1 standards when used in combination with a hard hat and visor
• Compliant with OSHA 1910.135 and 1926.100
• Molded nylon bracket is dielectric and non-conductive
• Easy to attach front mount style
• Please note: Visor headgear or a hard hat visor carrier must be worn with the appropriate visor and ANSI-approved eyewear for complete OSHA compliance

PRODUCT DESCRIPTION

The Malta Dynamics line of Hard Hat Mounted Face Protection is designed specifically as an accessory to the Malta Dynamics’ Hard Hat line. When job site applications demand both head and face protection our wide variety of products are compliant, safe, durable, and affordable. The Malta Dynamics flat acetate visor is to be used in conjunction with the Malta Dynamics brand face shield brackets to protect against light chemical splashes and impacts. Brackets are available in several mounting styles that attach securely to Malta Dynamics’ hard hats and caps. Malta Dynamics’ visors conform to ANSI/ISEA Z87.1-2010 standard for face protection when used in combination with Malta Dynamics’ headgear or face shield brackets. Products are available for both high heat, high impact, and basic impact applications. Always wear ANSI Z87.1-2003 approved goggles or safety glasses with face shield frames and visors for maximum protection.

FEATURES

• The face shield bracket complies with ANSI Z87.1 standards when used in combination with a hard hat and visor
• Compliant with OSHA 1910.135 and 1926.100
• Molded nylon bracket is dielectric and non-conductive
• Easy to attach front mount style
• Please note: Visor headgear or a hard hat visor carrier must be worn with the appropriate visor and ANSI-approved eyewear for complete OSHA compliance

The Bungee Tether Lanyard offers secure, flexible, and durable tool attachment for professionals. Its high-strength design minimizes drop risks while providing comfort and reliability during demanding tasks and work environments.

Features:

• AUTO-LOCK Swivel Karabiner

• Width: 2.0cm

• Minimum Length: 89cm

• Maximum Length: 131cm

• Capacity: 7.0kg

This premium bungee tether lanyard ensures maximum safety and reliability for tool handling. Designed with strength and flexibility, it is ideal for professionals who need secure and durable performance.

Features:

• AUTO-LOCK Karabiner

• Width: 2.5cm

• Minimum Length: 89cm

• Maximum Length: 131cm

• Capacity: 16.0kg

The Bungee Tether Lanyard with two swivel hooks is engineered for superior strength, flexibility, and safety. Its shock-absorbing bungee design reduces strain while keeping tools secure and accessible at all times. Built with professional-grade durability, it ensures maximum reliability for heavy-duty tasks and minimizes drop hazards in challenging work environments. With its dual swivel hooks, it offers enhanced versatility and smooth movement, making it an essential safety tool for professionals.

Features:

• AUTO-LOCK Karabiner

• Width: 2.5cm

• Minimum Length: 95cm

• Maximum Length: 150cm

• Capacity: 15.0kg

PRODUCT DESCRIPTION

The Pygmy Hog 11' Self-Retracting Lifeline with Steel Snap Hook is designed to be the best mini retractable on the market. Extremely lightweight, the Pygmy is portable and can be used either in mobile or stationary applications. Available with a variety of connector configurations, the Pygmy is built to work as a single unit, or in a kit of two.

FEATURES

• Meets ANSI Z359.14-2014 ANSI A10.32-12
• Complaint with OSHA 1926 Subpart M, OSHA 1910
• ANSI Capacity Range: 130-310 lbs.
• Product Weight: 7.8 lbs.
• C1004 Dual Connector Carabiner Included
• Steel Snap Hook
• Lightweight and Durable
• Fits in the Palm of Your Hand
• Lifeline Material: UHMWPE and Polyester
• For overhead use only

FEATURES

• 9oz flame-resistant cotton - effective up to 100 washes
• Extended tail for added coverage and protection
• Stand-up collar with raised back, and scratchless hook-n-loop closure, for extended coverage and protection
• Underarm gussets for added mobility and reach
• Large inside pocket and soapstone pocket on the upper arm
• Snap button wrists
• 33in Total length, not including standup collar