ANCHOR POINTS

1" Removable Concrete Anchor 10K1" Removable Concrete Anchor 10K

1" Removable Concrete Anchor 10K

$239.00

PRODUCT DESCRIPTION

The 1" Removable Concrete Anchor 10K is designed for use in 10-inch thick, cured concrete with a compression strength of at least 3000 p.s.i. This reusable concrete anchor is easy to install, just compress the string and insert the cable shaft into the hole. This anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for fall arrest, fall restraint, and as a work positioning device. The 1" Removable Concrete Anchor fits holes of 1 inch in diameter and has an ultimate breaking strength of 10,000 pounds.

FEATURES

  • Meets ANSI Z359.18-2017, ANSI A10.32-12, and CA-EN 795
  •  Compliant with OSHA 1926.502 and OSHA 1910.66
  • Size: 1″
  • Weight: 0.9-lbs
  • Used in concrete substrate only
  • Breaking Strength: 10,000 lbs / 44kn
  • Applications include: fall protection, restraint, work positioning

 

3/4" Removable Concrete Anchor 5K3/4" Removable Concrete Anchor 5K

3/4" Removable Concrete Anchor 5K

$113.99

PRODUCT DESCRIPTION

The 3/4" Removable Concrete Anchor 5K (Part # A6002) is designed for use in 12-inch thick cured concrete with a compression strength of at least 3000 p.s.i. The concrete anchor is easy to install, just compress its spring and insert the cable shaft into the hole. This anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for fall arrest, restraint, and as a work positioning device. It has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 3/4" reusable Concrete Anchor fits holes of 3/4 inches in diameter and 3 inches deep, and has an ultimate breaking strength of 5,000 pounds.

FEATURES

  • Meets ANSI Z359.18-2017, ANSI A10.32-12, and CA-EN 795
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Size: 3/4″
  • Weight: 0.4-lbs
  • Used in concrete substrate only
  • Can fit a 3/4” hole diameter, 3" deep minimum
  • Applications include: fall protection, restraint, work positioning

 

7/8" Precast Concrete Toggle Lock Anchor 5K7/8" Precast Concrete Toggle Lock Anchor 5K

7/8" Precast Concrete Toggle Lock Anchor 5K

$134.99

PRODUCT DESCRIPTION

The 7/8" Precast Concrete Toggle Lok Anchor 5K (Part #A6004) is a versatile, portable precast anchor used exclusively as a concrete/steel anchorage connector for fall protection. These precast concrete lifting anchors are easy to install, just compress its spring and insert the cable shaft into the hole, and can be inserted inside precast concrete and steel flanges. This concrete anchor is designed for use in 12-inch thick cured precast concrete with a compression strength of at least 3000 p.s.i.

FEATURES

  • Meets ANSI Z359.1-2007, ANSI A10.32-12 and CA-EN 795
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Size: 7/8”
  • Weight: 0.6-lbs
  • Breaking Strength: 5,000 lbs / 22kn

 

3/4" Precast Concrete Toggle Lok Anchor 5K3/4" Precast Concrete Toggle Lok Anchor 5K

3/4" Precast Concrete Toggle Lok Anchor 5K

$123.99

PRODUCT DESCRIPTION

the 3/4" Precast Concrete Toggle Lok Anchor 5K (Part #A6005) is a versatile, portable precast anchor used exclusively as a concrete/steel anchorage connector for fall protection. These precast concrete lifting anchors are easy to install, just compress their spring and insert the cable shaft into the hole, and can be inserted inside precast concrete and steel flanges. This concrete anchor is designed for use in 12-inch thick cured precast concrete with a compression strength of at least 3000 p.s.i.

FEATURES

  • Meets ANSI Z359.18-2017, ANSI A10.32-12, and CE-EN 795
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Size: 3/4”
  • Weight: 0.45-lbs
  • Breaking Strength: 5,000 lbs / 22kn

 

Beam Trolley 3" - 10" 5kBeam Trolley 3" - 10" 5k

Beam Trolley 3" - 10" 5k

$399.99

PRODUCT DESCRIPTION

The I-Beam Trolley Anchor (Part # A6101) is an anchor designed to be used in combination with either a lanyard or an SRL to form a complete I-Beam trolley system. It may also be used for fall restraint and as a work positioning device. The I-Beam trolley wheels allow for smooth travel around the work area while always remaining connected. The safety locking toggles allow for easy adjustment and also eliminate the risk of accidental clamp slippage. For use by one worker with a combined weight of up to 310 pounds. This is the most versatile I-Beam trolley system on the market.

FEATURES

  • Meets ANSI Z359.18-2017,  ANSI A10.32-12, and CA-EN 795
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Product Weight: 7.7 lbs.
  • Beam Flange Width: 3″ – 10″
  • Breaking Strength: 5,000 lbs / 22kn
  • Free Moving Rollers
  • Web/D-Ring connection point
  • Easy pin adjustment

 

Beam Walker Super Slider 3" - 14"Beam Walker Super Slider 3" - 14"

Beam Walker Super Slider 3" - 14"

$165.99

PRODUCT DESCRIPTION

The Beam Walker Super Slider 3" - 14" (Part#A6103) is a fall arrest anchor designed for use on the top flange of steel I or H beam. Light, smooth, and easy to use, the Beam Walker Super Slider 3" - 14" is designed for fall protection, rope access, and work positioning. This I-Beam trolley is the best on the market for worker safety!

FEATURES

  • Meets ANSI Z359.18-2017, ANSI A10.32-12, and CE-EN 795
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Beam Flange Width Range: 3.5″ to 14″
  • Beam Flange Thickness: .25″ to 1.25″
  • Breaking Strength: 5,000 lbs / 22kn
  • Product Weight: 3.3 lbs.
Beam Walker Super Slider 12" - 30"Beam Walker Super Slider 12" - 30"

Beam Walker Super Slider 12" - 30"

$409.99

PRODUCT DESCRIPTION

 

The Beam Walker Super Slider 12" - 30" (Part #A6104) is a large version (30” capacity) fall arrest anchor designed for use on the top flange of steel I or H beam. Light, smooth, and easy to use, the Beam Walker Super Slider 12" - 30" is designed for fall protection, rope access, and work positioning. This I-Beam trolley is the best on the market for worker safety!

 

FEATURES

 

  • Meets ANSI Z359.18-2017, ANSI A10.32-12, and CA-EN 795

  • Compliant with OSHA 1926.502 and OSHA 1910.66

  • Beam Flange Width Range: 12″ to 30″

  • Beam Flange Thickness: .25" to 2.5"

  • Breaking Strength: 5,000 lbs / 22kn

  • Product Weight: 7.2-lbs / 3.35 kg

Vertical/Fixed Beam Anchor 3"-14" (5k)

Vertical/Fixed Beam Anchor 3"-14" (5k)

$254.99

PRODUCT DESCRIPTION

Malta Dynamics Vertical/Fixed Beam Anchors (Part #A6105) are designed for fall protection, rope access, and work positioning. This beam anchor is constructed with lightweight aircraft aluminum bars and a 360-degree swivel D-Ring connector. The clamps attach without tools to I-Beams either overhead or underfoot. This model has a breaking strength of 5,000 lbs. (22kN). If you need a beam anchor for fall protection, the vertical beam anchor is one of the best on the market.

FEATURES

 

  • Meets ANSI Z359.18-2017 and ANSI A10.32-12
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Beam Flange Width Range: 4″ to 14″
  • Beam Flange Thickness: .25" to 1.25"
  • Breaking Strength: 5,000 lbs / 22kN
  • Product Weight: 7 lbs.
5K Drop Through Anchor - 8.5' w/4" Round Plate5K Drop Through Anchor - 8.5' w/4" Round Plate

5K Drop Through Anchor - 8.5' w/4" Round Plate

$134.99

PRODUCT DESCRIPTION

The 5K Drop Through Anchor - 8.5' is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

FEATURES

  • Meets ANSI Z359.1-2007 and ANSI A10.32-12
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Product Weight: 1.8 lbs.
  • Plate Dimensions: 4″ x 3/16″
  • Breaking Strength: 5,000 lbs / 22kn
  • Application: Concrete Floors, Steel Girders, Steel Grates

 

5K Drop Through Anchor - 8.5' w/6" Round Plate5K Drop Through Anchor - 8.5' w/6" Round Plate

5K Drop Through Anchor - 8.5' w/6" Round Plate

$154.99

PRODUCT DESCRIPTION

The 5K Drop Through Anchor - 8.5' is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

FEATURES

  • Meets ANSI Z359.1-2007 and ANSI A10.32-12
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Product Weight: 2.7 lbs.
  • Plate Dimensions: 6″ x 3/16″
  • Breaking Strength: 5,000 lbs / 22kn
  • Application: Concrete Floors, Steel Girders, Steel Grates

 

5K Drop Through Anchor - 8.5' w/12" Round Plate

5K Drop Through Anchor - 8.5' w/12" Round Plate

$154.99

PRODUCT DESCRIPTION

 

The 5K Drop Through Anchor - 8.5' is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

FEATURES

  • Meets ANSI Z359.1-2007 and ANSI A10.32-12
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Product Weight: 8.9 lbs.
  • Plate Dimensions: 12″ x 3/16″
  • Breaking Strength: 5,000 lbs / 22kn
  • Application: Concrete Floors, Steel Girders, Steel Grates
5K Wire Rope Sling Choker - 6ft

5K Wire Rope Sling Choker - 6ft

$42.99

PRODUCT DESCRIPTION

The 5K Wire Rope Sling - 6ft is an ANSI Z359 certified anchorage connector with iridescent blue tubing for easier cable inspections. This wire rope sling can be used in a basket configuration. Cable slings are excellent temporary and semi-permanent ANSI-certified anchors. Malta Dynamics has the best wire rope slings for sale. They are available in 3' and 6' lengths with various terminations for versatility on the job or in a rescue kit.

FEATURES

  • Meets ANSI Z359.1-2007 and ANSI A10.32-12
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Product Weight: 1.3 lbs.
  • Breaking Strength: 5,000 lbs / 22kn
  • Durable & easy to use
  • Steel thimble eye
  • Cable resists wear around sharp edges
5K Wire Rope Sling - 6ft5K Wire Rope Sling - 6ft

5K Wire Rope Sling - 6ft

$42.99

PRODUCT DESCRIPTION

The 5K Wire Rope Sling - 6ft is an ANSI Z359 certified anchorage connector with iridescent blue tubing for easier cable inspections. This wire rope sling can be used in a basket configuration. Cable slings are excellent temporary and semi-permanent ANSI-certified anchors. Malta Dynamics has the best wire rope slings for sale. They are available in 3' and 6' lengths with various terminations for versatility on the job or in a rescue kit.

FEATURES

  • Meets ANSI Z359.18-2017 and ANSI A10.32-12
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Product Weight: 1.3 lbs.
  • Breaking Strength: 5,000 lbs / 22kn
  • Durable & easy to use
  • Steel thimble eye
  • Cable resists wear around sharp edges

 

5K Wire Rope Sling - 3ft5K Wire Rope Sling - 3ft

5K Wire Rope Sling - 3ft

$37.99

PRODUCT DESCRIPTION

The 5K Wire Rope Sling - 3ft is an ANSI Z359 certified anchorage connector with iridescent blue tubing for easier cable inspections. This wire rope sling can be used in a basket configuration. Cable slings are excellent temporary and semi-permanent ANSI-certified anchors. Malta Dynamics has the best wire rope slings for sale. They are available in 3' and 6' lengths with various terminations for versatility on the job or in a rescue kit.

FEATURES

  • Meets ANSI Z359.18-2017 and ANSI A10.32-12
  • Compliant with OSHA 1926.502 and OSHA 1910.66
  • Product Weight: 0.9 lbs.
  • Breaking Strength: 5,000 lbs / 22kn
  • Durable & easy to use
  • Steel thimble eye
  • Cable resists wear around sharp edges
Roof Anchor 12" StandardRoof Anchor 12" Standard

Roof Anchor 12" Standard

$314.99

PRODUCT DESCRIPTION

The Malta Dynamics A6300 - Roof Anchor 12" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible with installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6300 roof anchor is composed of durable galvanized steel and is compatible for use with SRLs, vertical lifelines, and shock-absorbing lanyards.

FEATURES

  • OSHA Compliant
  • Meets ANSI Z359.1-2007
  • Meets IWCA I-14.1 
  • Product Weight: 32.7 lbs.
  • For use on steel or concrete substrates (see manual for requirements)
  • Durable galvanized finish
  • Great for use with retractable lifelines, vertical lifelines, or rope grab units
  • The post extends past the roofing substrate to make the attachment point accessible
  • Round post works with most off-the-shelf flashing kits

 

Roof Anchor 18" StandardRoof Anchor 18" Standard

Roof Anchor 18" Standard

$334.99

PRODUCT DESCRIPTION

The Malta Dynamics A6301 - Roof Anchor 18" Standard is a fixed post roof top anchor, intended for permanent applications only. The A6301 has been thoroughly tested (see testing and compliance page on this product) and is compatible with installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 18-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6301 roof anchor is composed of durable galvanized steel and is compatible for use with SRLs, vertical lifelines, and shock-absorbing lanyards.

FEATURES

  • OSHA Compliant
  • Meets ANSI Z359.1-2007
  • Meets IWCA I-14.1 
  • Product Weight: 35.1 lbs.
  • For use on steel or concrete substrates (see manual for requirements)
  • Durable galvanized finish
  • Great for use with retractable lifelines, vertical lifelines, or rope grab units
  • The post extends past the roofing substrate to make the attachment point accessible
  • Round post works with most off-the-shelf flashing kits