PRODUCT DESCRIPTION

Non-adhesive barricade tape for use in cordoning off areas in industry, construction, events, and temporally restricted areas or operations. Strong durable quality with excellent tear strength.

FEATURES

• Bold, black lettering on a bright, long-lasting yellow background will be hard to miss.
• Yellow background for CAUTION/CAUTION tape
• Made of tough, durable (2.5 mils) polyethylene
• Highly resistant to acids, alkalis, and other soil components
• Tape is 3-Inch (76 mm) wide in a 200-foot (61 m) roll

PRODUCT DESCRIPTION

Non adhesive barricade tape for use in cordoning off areas in industry, construction, events and temporally restricted areas or operations. Strong durable quality with excellent tear strength.

FEATURES

• Bold, black lettering on bright, long-lasting Red background will be hard to miss
• Red background for DANGER tape
• Made of tough, durable (2.5 mil) polyethylene
• Highly resistant to acids, alkalis and other soil components
• Tape is 3-Inch (76 mm) wide in a 200-foot (61 m) roll

PRODUCT DESCRIPTION

Qualitative Fit Testing can be used on what is defined as tight-fitting respirators, with the exception of full-face masks.  Full face masks cannot be tested because the test hood is not large enough for the mask fitted with a filter. For testing this product it will be necessary to use the Quantitative method. Qualitative Fit Testing can be used not only as a test method to ensure your employees are properly protected; but also as a very effective way of training them in the correct way of fitting a mask. Dust and half masks commonly fail to do the job they are intended to do because of poor fitting and care by the user.

The seal between the face and the edge of the mask is the most common problem area. You will also see users using a mask after having kept it on their heads or hanging around the neck. The test employs a hood to create a small test chamber around the user's head and a test solution. This test solution has a bitter taste. It is the same type of solution that is put on children's toys and fingernails to stop them from chewing them. As the test uses these two consumable parts and is designed to be carried out by the employer; it is a very cost-effective solution for assessing the ability of the selected Respiratory Protective Equipment and the training given to protect the employee.

PRODUCT DESCRIPTION

The airfed Faceshield meets all requirements of EN 270, features a preset regulator to ensure that the wearer receives a continuous flow of 160-230 Ltr / min to faceshield headpiece with a protection factor of up to 200. Items included are Browguard, Harness, Visor, Air tube & Diffuser, Face seal, and Neck cover.

PRODUCT DESCRIPTION:

A fully integrated TH3 powered air respirator offering 4 of the highest levels of protection in one intuitive head-mounted unit. Giving the wearer complete above the neck 4 in 1 protection. PowerCap Infinity, the perfect choice for many industries where dust poses a great danger to health. The unit provides the very latest in Powered Air Purifying Respiratory technology, combining decades of innovation from JSP in the fields of respiratory, head, eye, and face protection.

FEATURES:

• Built around an EVO5 Olympus industrial safety helmet combining a super-strong ABS shell for superior all-day protection with the comfort of the Evolution 3D-Adjustment harness system. Conforming to: EN397
• High capacity HEPA filters coupled with aerodynamically optimized pre-filter cover to ensure that PowerCap Infinity delivers 160 liters per minute of clean air to the user with maximum battery efficiency. Filters can be changed easily with the quick-change bayonet system.
• PowerCap Infinity provides users with clean air to the level of EN12941:1998 + A2:2008 TH3P - The highest possible rating with an APF of 40.
• The optical class 1 visor offers impact protection at speeds of up to 270mph (Tested using a 6mm steel ball bearing). The visor has a replaceable peel-off visor protector to prolong its life. Conforming to: EN166.1.B
• Developed to seamlessly integrate with Sonis helmet-mounted ear defenders. Designed by the JSP R&D team working with a leading UK acoustic engineering research facility, the Sonis helmet-mounted range peaks at an unbeaten level of 36 SNR.
• Why use hearing protection? - The World Health Organisation has identified noise-induced hearing loss as being the most common permanent and preventable injury in the world. Hearing protection is now a category III PPE product making it essential that the right protection is selected. Conforming to: EN352-3
• The PowerCap Infinity has been designed by the JSP R&D team, inspired by feedback received from workers who regularly wear Powered Air Purifying Respirators (PAPR). The goal was to fully understand the issues these users face and to develop a unit that performs above and beyond any other unit on the market.
• Designed from the ground up to deliver unrivaled performance. Power Cap Infinity is fully loaded with performance-enhancing technology, neatly packaged into a single head top unit eliminating the need for cumbersome and restrictive waist-mounted units and hoses.
• Dust in the workplace is a significant issue. HSE figures (2017) show that 18,000 new cases of work-related respiratory disease were diagnosed. A significant proportion of these was a result of exposure to silica.

Aerialine 20m Horizontal Life Line 

Temporary flexible horizontal anchor line for spans of between 3m and 20m. Very easy to install (and can be by one person) it has been tested for use for up to 2 persons.

• Length: 20m
• Made from 30mm polyester webbing
• Easy to install: has a unique ratchet tensioning system
• With 2 anchorage slings. Conforms to EN795:2012 type B.
• With 2 twist lock connectors in alloy steel. Gate opening: 22.5 mm. Conforms to EN362:2004 class B.
• Designed for 2 Users.

FEATURES

• 250 pairs of 267-HPF310 disposable earplug loose in display box
• Perfect size for users with narrow auditory canals
• PowerSoft™ foam with optimal expansion recovery time perfectly adapts to smaller ear canals
• Soft and comfortable feel for all-day comfort
• Easy to roll down to achieve a consistent, uniform fit
• NRR 28 protection

Wall Mounted Lens Cleaning Station

Keep your safety spectacles and goggles clean with this ready to hand lens cleaning station. This kit comes with 600 lens tissues and an 8oz bottle of cleaning fluid. The use of this station allows for the reduction of static and fogging of your spectacles without risk of scratching or damaging lens coatings.

• Large capacity - 600 tissues and an 8oz of cleaning fluid.
• Tissue dispensers - Tissues are dispensed from the left and right side of the cleaning station.
• Convenience - Can be mounted on a vertical surface with the hang holes on the rear of the pack.
• Recyclable - The station is fully recyclable. 

PRODUCT DESCRIPTION

The Portwest A270 Cow Grain Leather Classic Driver Gloves is a tough, hard-wearing glove. Made from premium full-grain cow leather, which provides a longer-lasting glove, with increased puncture resistance properties.

FEATURES

• CE certified
• Premium full-grain cow leather
• Classic leather driver
• Increased puncture resistance properties
• Retail tag which aids presentation for retail sales

PRODUCT DESCRIPTION

Portwest A620 Cut Resistant Level-3 PU Palm Glove is Combining cut level B resistance, comfort, dexterity and grip in a seamless PU palm dipped liner.

FEATURES

• CE certified
• Level B cut resistance
• Palm dipped to increase dexterity and ventilation
• Smooth PU coating for increased abrasion resistance
• Low-risk cut protection
• 100% Breathable seamless liner
• 13 gauge liner for a perfect fit
• ANSI Cut Level A2

PRODUCT DESCRIPTION

The protectors can be put into the standoff position. Compatible with Expertbase helmets and PW51.

FEATURES

• CE-CAT III
• Easy to clip-on
• Retail bag which aids presentation for retail sales
• Individually packed for vending machines

PRODUCT DESCRIPTION

When temperatures are soaring stay visible and cool in this revolutionary garment. The mesh top allows for maximum breathability and airflow, ensuring cool and comfortable wear.

FEATURES

• Cooling mesh upper torso for increased breathability
• Reflective tape for increased visibility
• Front zip opening for easy access
• Two lower patch pockets
• Phone and pen holder pocket
• D-ring for keys or ID cards
• Dual ID holder allows the use of both portrait and landscape ID card display
• Radio loop for easy clipping of a radio
• Certified to EN ISO 20471 after 50x washes
• CE certified
• Retail bag which aids presentation for retail sales
• 7 pockets for ample storage