PRODUCT DESCRIPTION

The Malta Dynamics Hybrid Hog Self Retracting Lifelines are uniquely engineered to meet the strict requirements of ANSI Z359.14-2014 for both Class A & Class B. They are manufactured in lengths ranging from 20’-30’. The braking mechanism holds the maximum average arresting force to under 900lbs and the maximum arresting distance to under 24 inches. Made from galvanized steel and high-strength thermoplastic polymer for additional strength and durability, all Malta Dynamics Hybrid Hog SRLs are tested to the strict ANSI protocols and meet all applicable OSHA standards.

FEATURES
 

• Hybrid Dual Class-Meets both ANSI Class A and Class B requirements simultaneously
• 24" Maximum arresting distance
• 900lb maximum average arresting force
• Meets ANSI Z359.14-2014 and ANSI A10.32-12
• OSHA 1926 Subpart M, OSHA 1910, 1926.502, and 1910.66
• Lightweight and Durable Housing
• Comes with Swivel Top and Bottom Connection Points
• Designed to lower impact force at impact
• RFID Chip
• Gripping Snout
• Side payout allows incredibly smooth cable payout and retraction
• Stackable design minimizes the space required for storage
• Worker Capacity Range: 130-310 lbs.
• Connector Material: Galvanized steel or aluminum
• Lifeline Material: Galvanized steel
• For overhead use only

PRODUCT DESCRIPTION

The Malta Dynamics Razorback™ Heavy-Duty 20' SRL incorporates a newly designed quick-action braking system.  The SRLs are manufactured from non-corrosive, lightweight components and are built to be the toughest, most durable SRLs on the market. 
 

FEATURES

• Meets ANSI Z359.14-2014, ANSI A10.32-12
• Compliant with OSHA 1926 Subpart M, OSHA 1910
• ANSI rated capacity range: 130-310 lbs.
• Carabiner Included
• Durable Aluminum Housing
• Built-In Easy-Carry Handle
• Galvanized Steel Cable
• Swivel Top
• Connector Material: Alloy Steel Snap Hook
• Product Weight: 14.9 lbs.
• For overhead use only

PRODUCT DESCRIPTION

The 24” rebar chain assembly is a work positioning device designed to allow workers to perform hands-free work while elevated off the ground. While still being connected to a fall arrest device, the user can attach the snap hooks to the side d-rings on their harness, attach the rebar hook to the rebar structure, lean away from the wall and begin to work. 

FEATURES

• Swiveling Rebar Hook
• Lightweight and Durable

PRODUCT DESCRIPTION

The Pygmy Hog 11' Self-Retracting Lifeline with Rebar Hook is designed to be the best mini retractable on the market. Extremely lightweight, the Pygmy is portable and can be used either in mobile or stationary applications. Available with a variety of connector configurations, the Pygmy is built to work as a single unit, or in a kit of two.

FEATURES

• Meets ANSI Z359.14-2014 ANSI A10.32-12
• Compliant with OSHA 1926 Subpart M, OSHA 1910
• ANSI Capacity Range: 130-310 lbs.
• Product Weight: 8.6 lbs.
• C1004 Dual Connector Carabiner Included
• Rebar Hook
• Lightweight and Durable
• Fits in the Palm of Your Hand
• Lifeline Material: UHMWPE and Polyester
• For overhead use only

PRODUCT DESCRIPTION

The new Malta Dynamics 11’ Pygmy Hog Web SRL is manufactured with a durable Dyneema Fiber lifeline.  It features a swivel top and a peri form hook, as well as lightweight and durable Polymer housing.  The 11’ SRL includes a quick-action braking system, which is manufactured from non-corrosive, lightweight components.

 

FEATURES

 

• Meets ANSI Z359.14-2014, ANSI A10.32-12
• Compliant with OSHA 1926 Subpart M, OSHA 1910
• ANSI Worker Capacity Range: 130-310 lbs.
• Carabiner included
• Compact and lightweight design
• Lifeline Material: UHMWPE and Polyester
• Product Weight: 4.25 lbs.
• For overhead use only

PRODUCT DESCRIPTION

The Pygmy Hog 11' Self-Retracting Lifeline with Peri Form Hook is designed to be the best mini retractable on the market. Extremely lightweight, the Pygmy is portable and can be used either in mobile or stationary applications. Available with a variety of connector configurations, the Pygmy is built to work as a single unit, or in a kit of two.

 
FEATURES

• Meets ANSI Z359.14-2014 ANSI A10.32-12
• Compliant with OSHA 1926 Subpart M, OSHA 1910
• ANSI Capacity Range: 130-310 lbs.
• Product Weight: 9.4 lbs.
• C1004 Dual Connector Carabiner Included
• Peri Form Hook
• Lightweight and Durable
• Fits in the Palm of Your Hand
• Lifeline Material: UHMWPE and Polyester
• For overhead use only

PRODUCT DESCRIPTION

The new Malta Dynamics 11’ Web SRL is manufactured with a durable Dyneema Fiber lifeline.  It features a swivel top and a peri form hook, as well as lightweight and durable Polymer housing.  The 11’ SRL includes a quick-action braking system, which is manufactured from non-corrosive, lightweight components.

 

FEATURES

 

• Meets ANSI Z359.14-2014, ANSI A10.32-12
• Compliant with OSHA 1926 Subpart M, OSHA 1910
• ANSI Worker Capacity Range: 130-310 lbs.
• This product features a Universal Rebar Hook
• Carabiner included
• Compact and lightweight design
• Lifeline Material: UHMWPE and Polyester
• Product Weight: 4.7 lbs.
• For overhead use only

PRODUCT DESCRIPTION

 

The Pygmy Hog 11' Self-Retracting Lifeline with Steel Snap Hook is designed to be the best mini retractable on the market. Extremely lightweight, the Pygmy is portable and can be used either in mobile or stationary applications. Available with a variety of connector configurations, the Pygmy is built to work as a single unit, or in a kit of two.

FEATURES

 

• Meets ANSI Z359.14-2014 ANSI A10.32-12
• Complaint with OSHA 1926 Subpart M, OSHA 1910
• ANSI Capacity Range: 130-310 lbs.
• Product Weight: 7.8 lbs.
• C1004 Dual Connector Carabiner Included
• Steel Snap Hook
• Lightweight and Durable
• Fits in the Palm of Your Hand
• Lifeline Material: UHMWPE and Polyester
• For overhead use only

PRODUCT DESCRIPTION

The intermediate by-pass adapter can be added to any MD post to help workers continue along the horizontal path of the i-beam or concrete beam they are walking on. The unique design keeps the system's horizontal cable in place while still allowing workers enough room to pass the snap hook of their lanyard through the intermediate adapter without ever needing to disconnect from the horizontal lifeline cable system. Additional posts are commonly used in areas where not much clearance exists from where workers are walking on the beams to an obstruction below, typically the ground. Reduces the amount of horizontal cable sag. Sold as one (1) each. The intermediate by-pass adapter can be added to any MD post to help workers continue along the horizontal path of the i-beam or concrete beam they are walking on. The unique design keeps the system's horizontal cable in place while still allowing workers enough room to pass the snap hook of their lanyard through the intermediate adapter without ever needing to disconnect from the horizontal lifeline cable system. Additional posts are commonly used in areas where not much clearance exists from where workers are walking on the beams to an obstruction below, typically the ground. Reduces the amount of horizontal cable sag. Sold as one (1) each.

PRODUCT DESCRIPTION

 

Stanchion post for clamping to steel I-beams - Fits flange thicknesses from 1/2" to 2 1/4" . Fits flange widths from 8" to 22".  Simple easy setup! Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System. Horizontal Lifeline Fall Protection Cable Assembly attaches between either two MD posts for steel I-beams (P-00041-1) or between two MD posts for concrete beams (P-00041-10) to complete a two (2) person horizontal lifeline fall protection system. Sold as one (1) each. For temporary use only. Add to cart MD Post for Concrete Beams $427.99 PRODUCT DESCRIPTION Stanchion post for bolting to concrete or steel beams. Max Flange 1/2” to 12” (steel). Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System. Stanchion post for bolting to concrete or steel beams. Max Flange 1/2” to 12” (steel). Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System. Add to cart Standard Safety Stancion $427.99 PRODUCT DESCRIPTION   Stanchion post for clamping to steel I-beams - Fits flange thicknesses from 1/2" to 2 1/4". Fits flange widths from 8" to 22". Simple easy setup! Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System. Stanchion post for bolting to concrete or steel beams. Max Flange 1/2” to 12” (steel). Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System.

PRODUCT DESCRIPTION

 

Stanchion post for clamping to steel I-beams - Fits flange thicknesses form 1/2" to 2 1/4". Fits flange widths from 8" to 22".  Simple easy setup! Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System. In-line shock absorber to be used as part of either MDK-0060-S - Deploys when a fall occurs to dampen the impact load to MD I-beam or concrete stanchions. Also reduces the bounce of the horizontal cable which minimizes the chance of cascading (when an SRD's brakes lock, unlock, lock, etc). Old as one (1) each. For Temporary use only.

PRODUCT DESCRIPTION

 

Complete 2 Person 60ft Adjustable Horizontal Lifeline System for workers accessing and performing work from elevated concrete beams or I-beams. Quick and easy set-up. The system includes Two (2) Stanchion Posts (P-00041-10) and One (1) Horizontal Lifeline Fall Protection Cable Assembly (P-00147-60). For temporary use only. Stanchion post for bolting to concrete or steel beams. Max Flange 1/2” to 12” (steel). Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System.

FEATURES

• Custom engineered for billboard use
• Material: powder-coated steel
• 5,000 lb pre-installed anchor
• Discreet design for permanent installation
• A curved neck allows for anchorage on the front of the billboard without covering the advertisement

PRODUCT DESCRIPTION