PRODUCT DESCRIPTION

The Malta Dynamics Parapet Wall anchor was designed to be used on flat roofs that are surrounded by a parapet wall. This anchor is fully adjustable and can be installed on wall thicknesses from 2.36” all the way up to 14.1 inches. This anchorage device is non-penetrating and requires no tools to install

FEATURES

• Non-penetrating design to eliminate parapet wall damage
• No Installation tools required- Dual tightening handles for even force distribution
• Rubber protective pads to eliminate damage to the parapet wall
• Reusable
• Specs
• Minimum wall thickness 2.36"
  
• Maximum wall thickness 14.1”
• The overall length of 25.5”
• Overall height 14.25
• Main body: Alloy Steel
• D-ring: Zinc Plated Steel
• Set Screws: Zinc Plated Steel
• Protective Rubber Pads
• Max User Capacity 130-310 lbs.
• 9” minimum wall height

PRODUCT DESCRIPTION

The Malta Dynamics Threaded Top 18" Roof Anchor is a fixed post rooftop anchor, intended for permanent applications only. The A6306 has been thoroughly tested (see testing and compliance page on this product) and is compatible with installation on steel and concrete substrates (fasteners sold separately). The 18-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6306 roof safety anchor is composed of durable galvanized steel and is compatible for use with SRLs, vertical lifelines, and shock-absorbing lanyards.

FEATURES

• OSHA Compliant
• Meets ANSI Z359.1-2007
• Product Weight: 35.8 lbs.
• For use on steel or concrete substrates (see manual for requirements)
• Durable galvanized finish
• Great for use with retractable lifelines, vertical lifelines, or rope grab units
• The post extends past the roofing substrate to make the attachment point accessible
• Round post works with most off-the-shelf flashing kits

PRODUCT DESCRIPTION

Malta Dynamics Warthog® Series Self Retracting Lifelines are some of the most durable SRLs available today, and are manufactured in lengths ranging from 10’-100’. They are made of galvanized steel cable and high-strength thermoplastic polymer for additional strength and durability. All Malta Dynamics Warthog® SRLs are tested to the strict ANSI protocols and meet all applicable OSHA standards.

FEATURES

• Meets ANSI Z359.14-2014, ANSI A10.32-12
• OSHA 1926 Subpart M, OSHA 1910
• ANSI Capacity Range: 130-310 lbs.
• Lightweight and Durable Housing
• Comes with Swivel Top Connection Point
• RFID Chip
• Gripping Snout
• Connector Material: Galvanized Steel
• Lifeline Material: Galvanized Steel
• Product Weight: 28.8 lbs.
• For overhead use only

PRODUCT DESCRIPTION

The Malta Dynamics Threaded Top 12" Roof Anchor is a fixed post rooftop safety anchor, intended for permanent applications only. The A6305 has been thoroughly tested (see testing and compliance page on this product) and is compatible with installation on steel and concrete substrates (fasteners sold separately). The 12-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6305 permanent roof anchor is composed of durable galvanized steel and is compatible for use with SRLs, vertical lifelines, and shock-absorbing lanyards.

FEATURES

• OSHA Compliant
• Meets ANSI Z359.1-2007
• Product Weight: 31.8 lbs.
• For use on steel or concrete substrates (see manual for requirements)
• Durable galvanized finish
• Great for use with retractable lifelines, vertical lifelines, or rope grab units
• The post extends past the roofing substrate to make the attachment point accessible
• Round post works with most off-the-shelf flashing kits

PRODUCT DESCRIPTION

The Malta Dynamics Multi-Directional Roof Anchor supports one worker in fall arrest or two workers in fall restraint. The four-directional connection points increase the working range (when detaching and reattaching to connection points). Workers can maintain both fall arrest and fall restraint.

FEATURES

• Meets ANSI A10.32-12
• Compliant with OSHA 1910 and OSHA 1926 Subpart M
• Product Weight: 12.4 lbs.
• Easy to install
• Supports 1 worker in fall arrest, or 2 workers in restraint
• 4 connection points
• Min. Breaking Strength 5,000 lbs.
• Worker Capacity Range: 130-310 lbs.
• Material: Powder Coated Steel

PRODUCT DESCRIPTION

Malta Dynamics Warthog® Series Self Retracting Lifelines are some of the most durable SRLs available today, and are manufactured in lengths ranging from 10’-100’. They are made of galvanized steel cable and high-strength thermoplastic polymer for additional strength and durability. All Malta Dynamics Warthog® SRLs are tested to the strict ANSI protocols and meet all applicable OSHA standards.

FEATURES

• Meets ANSI Z359.14-2014, ANSI A10.32-12
• Complaint with OSHA 1926 Subpart M, OSHA 1910
• ANSI Capacity Range: 130-310 lbs.
• Product Weight: 14.6 lbs.
• Lightweight and Durable Housing
• Comes with Swivel Top Connection Point
• RFID Chip
• Gripping Snout
• Connector Material: Galvanized Steel
• Lifeline Material: Galvanized Steel
• For overhead use only

PRODUCT DESCRIPTION

The Malta Dynamics Reusable Roof Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. Our roof anchors fit all roof pitches from flat to 12/12 and their thick-plated steel construction means longer-lasting product life. Supplied with all necessary fasteners.

FEATURES

• Meets OSHA 1910, OSHA 1926 Subpart M, and ANSI A10.32-12
• Can be installed with screws or nails
• Fits up to 12/12 roof pitch
• Fasteners provided
• For temporary use on wood rooftops
• Worker Capacity Range: 130-310 lbs.
• Material: Galvanized steel
• Min. Breaking Strength: 5,000 lbs.

PRODUCT DESCRIPTION

Specifically designed for permanent use on wood rooftops, these roof safety anchors are manufactured with two alloys D-ring ends, are 18" long, and are composed of stainless steel for exceptionally long life. Like all of our products, the Malta Dynamics Permanent Roof Anchor is 100% compliant with all applicable OSHA and ANSI regulations. The Permanent Roof Anchor is manufactured to ensure ease of installation and is ideal for both residential construction and maintenance work.

FEATURES

• Easy to install
• Exclusive hole layout reduces damage to truss during install
• Lightweight and durable
• Can be installed with screws or nails
• Fasteners provided (nails)
• Discreet design
• Intended for permanent use on wood rooftops.
• Meets OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.1-07, and ANSI A10.32-12
• Worker Capacity Range: 130-310 lbs.
• Material: Stainless Steel body and Alloy D-rings
• Min. Breaking Strength: 5,000 lbs

PRODUCT DESCRIPTION

The Malta Dynamics A6301 - Roof Anchor 18" Standard is a fixed post roof top anchor, intended for permanent applications only. The A6301 has been thoroughly tested (see testing and compliance page on this product) and is compatible with installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 18-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6301 roof anchor is composed of durable galvanized steel and is compatible for use with SRLs, vertical lifelines, and shock-absorbing lanyards.

FEATURES

• OSHA Compliant
• Meets ANSI Z359.1-2007
• Meets IWCA I-14.1 
• Product Weight: 35.1 lbs.
• For use on steel or concrete substrates (see manual for requirements)
• Durable galvanized finish
• Great for use with retractable lifelines, vertical lifelines, or rope grab units
• The post extends past the roofing substrate to make the attachment point accessible
• Round post works with most off-the-shelf flashing kits

FEATURES

• Compliant with OSHA 1926, OSHA 1910
• Meets ANSI Z359.3
• Adjustable from 4′ to 6′
• For Use in Restraint and Positioning Scenarios
• Single-Leg Construction
• Vibrant Orange Webbing Provides High Visibility
• 2 Steel Self-Locking Snap Hooks
• Label Protector
• UV Resistant 1” Polyester Webbing
• 3,600 lbs. Gate Strength on All Steel Connectors
• Product Weight: 2.4 lbs.
• Worker Weight Capacity Range: 130-310 lbs.
• Webbing Material: Polyester and Nylon
• Connector Material: Alloy Steel

PRODUCT DESCRIPTION

The Malta Dynamics A6300 - Roof Anchor 12" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible with installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6300 roof anchor is composed of durable galvanized steel and is compatible for use with SRLs, vertical lifelines, and shock-absorbing lanyards.

FEATURES

• OSHA Compliant
• Meets ANSI Z359.1-2007
• Meets IWCA I-14.1 
• Product Weight: 32.7 lbs.
• For use on steel or concrete substrates (see manual for requirements)
• Durable galvanized finish
• Great for use with retractable lifelines, vertical lifelines, or rope grab units
• The post extends past the roofing substrate to make the attachment point accessible
• Round post works with most off-the-shelf flashing kits

PRODUCT DESCRIPTION

The 5K Wire Rope Sling - 6ft is an ANSI Z359 certified anchorage connector with iridescent blue tubing for easier cable inspections. This wire rope sling can be used in a basket configuration. Cable slings are excellent temporary and semi-permanent ANSI-certified anchors. Malta Dynamics has the best wire rope slings for sale. They are available in 3' and 6' lengths with various terminations for versatility on the job or in a rescue kit.

Know More About Here: https://cdn.shopify.com/s/files/1/0026/2393/0479/files/5K_Wire_Rope_Sling_-_6ft.pdf?v=1715777085

FEATURES

• Meets ANSI Z359.18-2017 and ANSI A10.32-12
• Compliant with OSHA 1926.502 and OSHA 1910.66
• Product Weight: 1.3 lbs.
• Breaking Strength: 5,000 lbs / 22kn
• Durable & easy to use
• Steel thimble eye
• Cable resists wear around sharp edges

PRODUCT DESCRIPTION

Malta Dynamics 4.5' - 6’ Double Leg Stretch Internal Shock Absorbing Lanyard with 2 Rebar Hooks and 1 Steel Snap Hook is specifically designed to help reduce the hazards of tripping or catching on nearby machinery found on many of today’s industrial and construction sites. This lanyard is ideal for work in tight spaces and around machinery. This lanyard is designed to stretch from 4.5 feet when at rest out to 6 feet when needed. It is available in a variety of connector options, as well as both single and double-leg models. Double leg lanyards are for fall arrest and 100% tie-off.

FEATURES

• Meets ANSI Z359.13-2013, ANSI A10.32-12
• Compliant with OSHA 1926 Subpart M, OSHA 1910.66, OSHA 1926.502
• Worker Capacity Range: 130-310 lbs.
• Lightweight and durable
• Lanyard stretch helps reduce potential tripping hazards
• Vibrant orange color provides high visibility
• 1" polyester web
• Connectors are made from alloy steel min. 5000 lbs, tensile strength
• Connector gates are made from alloy steel Min. 3,600 lbs. side and front load
• Webbing Material: Polyester and steel

PRODUCT DESCRIPTION

The 5K Wire Rope Sling - 6ft is an ANSI Z359 certified anchorage connector with iridescent blue tubing for easier cable inspections. This wire rope sling can be used in a basket configuration. Cable slings are excellent temporary and semi-permanent ANSI-certified anchors. Malta Dynamics has the best wire rope slings for sale. They are available in 3' and 6' lengths with various terminations for versatility on the job or in a rescue kit.

FEATURES

• Meets ANSI Z359.1-2007 and ANSI A10.32-12
• Compliant with OSHA 1926.502 and OSHA 1910.66
• Product Weight: 1.3 lbs.
• Breaking Strength: 5,000 lbs / 22kn
• Durable & easy to use
• Steel thimble eye
• Cable resists wear around sharp edges

PRODUCT DESCRIPTION

The 5K Drop Through Anchor - 8.5' is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

FEATURES

• Meets ANSI Z359.1-2007 and ANSI A10.32-12
• Compliant with OSHA 1926.502 and OSHA 1910.66
• Product Weight: 2.7 lbs.
• Plate Dimensions: 6″ x 3/16″
• Breaking Strength: 5,000 lbs / 22kn
• Application: Concrete Floors, Steel Girders, Steel Grates

PRODUCT DESCRIPTION

The 5K Drop Through Anchor - 8.5' is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an opening in any 1-3/4 inch by 2-inch substrate, provided it is compliant with all applicable fall protection requirements. This drop-through anchor is compliant with all ANSI Z359.1-2007 regulations and is available in custom lengths upon request. Roof anchors for fall protection are the best way to keep your workers safe.

FEATURES

• Meets ANSI Z359.1-2007 and ANSI A10.32-12
• Compliant with OSHA 1926.502 and OSHA 1910.66
• Product Weight: 8.9 lbs.
• Plate Dimensions: 12″ x 3/16″
• Breaking Strength: 5,000 lbs / 22kn
• Application: Concrete Floors, Steel Girders, Steel Grates